Enzo6212
Member
Hello Everyone,
I've been reading and learning on the forums for quite a while and had originally bought a 800 but sold it before getting it in the air. I'm an experienced RC Heli pilot so I have a good general knowledge of RC systems and control surfaces. Anyway, I've purchased a previously owned (experienced and knowledgable owner) S900 and wanted to gain advice on a checklist of things to look for on a pre-owned machine prior to first flight. There have been so many small things I've read that owners have discovered that I wanted to make sure I didn't miss anything. For reference= S900 + A2 + IOSD MKII = going to use the A2 receiver with Futaba 14MZ - no gimbal at this point, just going to take some time to learn to control, hover and get familiar with flying before hanging anything on it. Thanks in advance for any tips and help.
I've been reading and learning on the forums for quite a while and had originally bought a 800 but sold it before getting it in the air. I'm an experienced RC Heli pilot so I have a good general knowledge of RC systems and control surfaces. Anyway, I've purchased a previously owned (experienced and knowledgable owner) S900 and wanted to gain advice on a checklist of things to look for on a pre-owned machine prior to first flight. There have been so many small things I've read that owners have discovered that I wanted to make sure I didn't miss anything. For reference= S900 + A2 + IOSD MKII = going to use the A2 receiver with Futaba 14MZ - no gimbal at this point, just going to take some time to learn to control, hover and get familiar with flying before hanging anything on it. Thanks in advance for any tips and help.
